Skip to main content

Tuning

Online Bass Tuner

Calculate bass tuning frequencies and tune your instrument with a microphone.

Bass Setup

Custom Open String Notes

Set each open string from the lowest-pitched string to the highest-pitched string.

These settings control the guided string selector, reference tones, live microphone tuner, and tuning reference. Changing a preset, custom note, reference pitch, or transpose value updates both tools.

Current string target
B0
String 5 · 30.87 Hz

Tune one open string at a time, starting with the lowest-pitched string. The selected target is shared by the reference tone and live tuner.

String Tuning Reference

String Open Note Frequency MIDI Note
65%
Choose a string and press Play Reference Tone to hear a note from your device.

The sound comes from your device speaker or headphones, not from the bass guitar. Gentle harmonics help low notes sound clearer on small speakers.

Live Bass Tuner

Detected Note
--
0.00 Hz
Target: --
FlatIn TuneSharp
-- cents
Waiting for microphone
Start the microphone, mute strings you are not tuning, and pluck only the selected open string.
Microphone is off. Press Start Microphone to begin.

How to Use Online Bass Tuner

1. Choose your bass. Select a 4-string, 5-string, or 6-string bass guitar.

2. Select a tuning. Choose a preset or set your own open notes using Custom Tuning.

3. Adjust transpose if needed. Use semitone steps to shift every string together, from -12 to +12.

4. Check the Tuning Reference. View each string's target note, frequency in Hz, and MIDI note number.

5. Use the reference tone. Play a target note to hear a reference pitch from your device.

6. Tune with your microphone. Use the Live Bass Tuner, select a string, allow microphone access, and play that open string.

Flat: The detected pitch is lower than the target. Tighten the string gradually.

Sharp: The detected pitch is higher than the target. Loosen the string gradually.

In Tune: The detected pitch is within the tool's tuning tolerance.

About Online Bass Tuner

Online Bass Tuner is designed as a practical, string-by-string bass tuning assistant. It combines a live microphone tuner, playable reference tones, guided string selection, and a tuning reference calculator. It supports common 4-string, 5-string, and 6-string bass configurations, alternative tunings, and custom open-string notes.

The calculator converts MIDI note values into target frequencies using the selected A4 reference pitch. The microphone tuner analyzes incoming audio locally in your browser and compares the detected pitch with your selected string target.

No audio recording or server upload is built into this tool. Microphone access is only used while the tuner is running.

Frequently Asked Questions

Yes. Bass Tuning Studio supports 4-string, 5-string, and 6-string bass guitars. Select your bass configuration in Bass Setup to display the corresponding tuning options and frequencies.

Yes. Select Custom Tuning and choose the open note for every string. Your custom tuning automatically updates both the Tuning Reference and Live Bass Tuner.

Transpose shifts all selected open-string notes up or down by semitones. You can adjust the tuning from -12 to +12 semitones without changing the interval between strings.

A4 reference pitch determines the frequency standard used to calculate musical notes. The standard setting is 440 Hz, but you can also select 432 Hz or 442 Hz.

The microphone tuner listens to your bass through your device microphone and analyzes its pitch. It compares the detected frequency with the selected target note and displays whether the string is flat, sharp, or in tune.

Microphone access requires browser permission and a secure connection (HTTPS or localhost). Check your browser's microphone permissions and make sure your microphone is connected and available.

The tuner is designed to analyze low bass frequencies, including B0. Detection quality depends on your microphone, background noise, and the strength of the incoming bass signal.

Flat: The detected pitch is lower than the target. Tighten the string gradually.

Sharp: The detected pitch is higher than the target. Loosen the string gradually.

In Tune: The detected pitch is within the tuner's tuning tolerance.

No audio recording or server upload is built into this tool. Microphone audio is analyzed locally in your browser while the Live Bass Tuner is active.

Background noise, string harmonics, other instruments, and weak microphone input can affect pitch detection. Play one open string at a time, let it ring clearly, and try tuning in a quieter environment.

Comments

Popular posts from this blog

L’Arc-en-Ciel: How to Hear the Bass as Part of the Whole Arrangement

A bassline can be technically correct and still feel weirdly lifeless. You hit the right frets, the timing is close, and yet the song somehow sounds like it left its personality in the parking lot. With L’Arc-en-Ciel , there is a lot to learn by listening beyond the notes: how the bass supports harmony, locks with the drums, connects sections, and adds melodic movement without fighting the guitars or vocals. This guide is a practical listening and practice companion for bassists exploring the band’s music. Instead of treating TAB as a page of fret numbers to memorize, we’ll use it as a map for understanding arrangement, groove, articulation, dynamics, and musical choices. You do not need advanced theory to get started—just a bass, a recording, and a willingness to listen more than once. Quick answer: What can bassists learn from L’Arc-en-Ciel basslines? L’Arc-en-Ciel songs are usefu...

M-VAVE MK-20 Review: A Multi-Effects Pedal for Guitar and Bass Players

The M-VAVE MK-20 is a guitar and bass multi-effects processor designed to put several sound-shaping and practice tools in one floor unit. Its advertised feature set includes built-in effects, amp and cabinet simulations, an expression pedal, a looper described as offering up to 120 seconds of capacity, and an integrated drum machine. That combination sounds convenient, especially if your current setup consists of one instrument, one amp, and a dream of experimenting with more sounds without turning your bedroom into a pedalboard warehouse. But an impressive feature list doesn't automatically make a processor the right choice. The real question is whether its effects, controls, and connections fit the music you play. For guitarists, the priorities might include distortion character, modulation, ambience, and preset switching. For bassists, the evaluation gets a little more specific: low-frequency clarity, note definition, dynamics, and the ...

M-VAVE Black Box Multi-Effects Processor Review: Budget-Friendly Tone Machine

Looking for a guitar and bass processor that can handle several jobs without turning your setup into a spaghetti monster of cables? The M-VAVE Black Box is a compact multi-effects unit described as combining effects, amp modeling, cabinet simulation with IR support, USB audio functionality, and rechargeable battery operation. That combination makes it interesting for musicians who want to experiment with different tones, record musical ideas, or practice without carrying a full-size rig everywhere. For bassists, it also raises some practical questions: Can you shape a useful low-end tone? Will the connections fit your recording setup? And do the available features match the way you actually play? This review looks beyond the feature list to explain how the listed functions may fit different musical situations, which limitations deserve attention, and what you should verify befo...